DMS 401
 
Sonotrax Handheld Fetal Doppler Series
Itroduces SS- 501E

High Power microprecessed Electrosurgical Unit


Applications 
  • Transurethral resection
  • Electrovaporization
  • Gastroenterology
  • Cardiology
  • Gynecology
  • orthopedics
  • Neurology


SS-501E microprocessed electrosurgical unit

Versatility. Power, Precision
DANATECH fitted the SS-501E unit a wide range of resources to perform from simple procedures to highly complex surgeries, with a smooth cut, effective coagulation and minimum tissue damage.
Simple and safe, the SS-501E provides delicate and normal monopolar cut (high cut) with better performance in fatty tissues, and also have built-in microbipolar coagulation.
The SS-501E operates with an intelligent system which monitors patient-plate contact quality, including a bargraph indicato.

Maxmimum control and range in all operating modes

Features:

  • two monopolarcutting options:normal and delicate
  • eleven funcation: cut (normal/delicate) - pure, blend 1, blend 2,blend 3; coagulation - spray, dipolar and microbipolor
  • digital power adjustment in two modes : fast and precise
  • digital display provides effective output power levels in all operating modes
  • handcontrol handpiece with sealed contacts and magnetic switching
  • allows connection to argon - gas plasma coagulator

Precision:

  • independent bipolar and microbipolar output,with precision control
  • non-volatile memory for power levels in all modes: pure cut, mixed cut, bipolar and microbipolar coagulation, recording the last setting utilized in case of power brownout or switching off the unit
  • automatic recognition of the patient - plate type (common or split)
  • PPM/PLC pushbutton which allows the utilization of the same cable for either common or split disposable plates ( similar to REM method )

Safety:

  • automatic voltage selection, thus avoiding damaging the unit in case of wrong connection
  • isolated power output to minimize the risk of burns
  • two output for handpiece with independent manual control, for simultaneous work by two surgeons
  • PPM patient - plate monitoring system, which takes into account the type of skin, including bargraph indicatorfor contact quality
  • lead and plate cable connection continuity monitoring, blocking operation and actiating visual signaling in case of failure.
  • audiovisual signaling of function with different tones for cut and coagulation
  • self-stiking plates to avoid burns
  • waterproof shielded panel to prevent liquids from entering the unit and to facilate disinfection
  • natural ventilation by convection
  • complies with IEC 60601-2-2- electric standards, including EMI ( electromagnetic interference ) test
Maximum Output Power

Output
Mode
Power (Watts)
load (Ohms)
Monopolar
Cut
Pure
300
300
Blend 1
250
Blend 2
200
Blend 3
150
300
Coagulation
Spray
120
Bipolar
80
100
Microbipolar
40
100

Technical information

Power Suply 100/240V- 45/65 Hz- automatic selection
Operating frequency 480 KHz
Dimensions: 19.0 cm (H) x 30.5 cm (W) x 38.5 cm (D)
Weight: 6.5 kg (without transport Cart)


Standard Accessories: Optional Accessories
   
Dual footswitch Bipolar footsswitch
Handpiece with foot control Disposable patient contact plate
Reusable patient contact plate Tungsten LOOP electrodes
kit of 6 electrodes Speciality electrodes
Operation Manual Monopolar forceps Bipolar forceps
All Right Reserved by Danatech Medical Systems, Inc, ©2005-2006.
14930 SW 104 St #26, Miami FL 33196, USA Ph: 305.388.2831 Fax: 305.883.9418